Florida Pallet Supply delivers high-quality new and recycled pallets directly to businesses in Westville and throughout Holmes County. From Manufacturing, Warehousing, Food Service to warehousing - we have the right pallets at competitive prices.
Same-day delivery available in Westville!
GET A PRICE →
Dry VanLive Load
Drop TrailerFlatbedWe deliver quality pallets on time, every time. Same-day or scheduled delivery, flexible delivery, and dedicated service. Large inventory means no supply shortages.
Save up to 40% on pallets in Westville!
Get Quote →Same-day and next-day available. Scheduled weekly deliveries for recurring orders.
Flexible - partial loads to full truckloads.
Yes! Buyback and retrieval programs available.
Fast response • Same-day or scheduled delivery • Westville, FL delivery
From manufacturing floors to distribution docks, Westville businesses trust Florida Pallet Supply for reliable pallet programs.
Westville's rural Holmes County setting supports peanut, corn, and row crop farming. Agricultural distributors use recycled pallets for cost-effective bulk fertilizer and farm input delivery to area farming operations.
Holmes County timber tracts near Westville generate demand for heavy-duty pallets for log handling and lumber distribution throughout the Florida Panhandle network.
Residential and agricultural construction in Holmes County uses building supply distributors serving Westville. Standard GMA pallets work across contractor supply chain dock systems.
We deliver pallets to cities throughout Holmes County and across all of Florida.
Florida Pallet Supply is a member of the national pallet industry and follows ISPM-15 heat treatment standards for all export pallets.
GMA 48x40 four-way stringer construction conforms to the National Wooden Pallet & Container Association (NWPCA) 2014 Uniform Standard; deck board configuration 7-board top, 5-board bottom.
Port Tampa Bay phosphate operations under Tampa Port Authority Rule 7-04 require corrosion-resistant pallet specs; we supply heat-treated stock that withstands phosphate-rich environments.
Florida's 'Right to Inspect' law allows commercial customers to audit pallet treatment records on 24-hour notice; our digital records portal supports same-day access.
48x40 GMA load capacity is 2,800 lb racked (face-loaded), 4,600 lb static, and 2,500 lb dynamic per ASME MH1 2016; deck board span 3.5 inches; deflection under rated load <0.5 inch.
Deck board edge type defaults to chamfered for forklift safety; square-edge available on request for ASRS compatibility; rounded-edge banding tracks available for high-throughput line-side delivery.
Live-load operations bring the trailer to your dock for a 90-minute window; loader/unloader provided; suited to customers without dedicated dock space or with intermittent volume.
Beverage distributors (beer, soda, water) move primarily 48x40 GMA in dry-van loads; standard week sees Mon/Wed/Fri delivery rotation; volume discounts kick in at 200+ pallets per week sustained.
Net 30 terms standard for established customers with credit approval; Net 15 or COD for first three orders; credit card and ACH accepted for spot orders.
Carbon footprint per delivered pallet (cradle-to-gate, including 75-mile delivery): new GMA ~21 kg CO2e; recycled Grade A ~7 kg CO2e; custom builds vary by spec.
Block pallet construction at Florida Pallet Supply uses nine 4-inch hardwood blocks arranged in a 3-by-3 grid with continuous-face top and bottom decks. Each block is precision-cut from kiln-dried hardwood and nailed with eight 3-inch screw-shank fasteners per block. The continuous-face deck is critical for ASRS (Automated Storage and Retrieval Systems) and AGV (Automated Guided Vehicle) compatibility because stringer interruptions in conventional pallets cause sensor read failures that halt automation lines. Block construction also supports true four-way pallet jack entry from all four sides, eliminating the partial-entry limitation of notched stringer pallets.
Heat treatment to ISPM-15 specification at Florida Pallet Supply runs in computer-monitored kilns sized for 1,200-pallet batch loads. Wood core temperature is verified by 9-point thermocouple grid: 4 surface probes plus 5 deep-core probes inserted into representative deck boards on each batch. Compliance demands 56 degrees Celsius core temperature held for 30 continuous minutes; our standard cycle holds 58 degrees for 35 minutes for a documented compliance buffer. Each batch generates a treatment log with timestamp, temperature curve, kiln number, lumber lot reference, and inspector signature, archived in the chain-of-custody database for the full 7-year retention period required for export verification.
Custom build-to-print pallets at Florida Pallet Supply begin with a CAD review against customer drawings, followed by lumber procurement matched to the spec. Aerospace-grade builds typically specify 7/8-inch deck boards, double-runner stringers with 3-inch block spacing, foam-lined cavity inserts for component protection, and humidity-control packets (silica gel or molecular sieve) inserted between deck layers. Lead time runs 5 to 10 business days depending on quantity and special-material availability. Each finished custom pallet receives a serial number etched into the lumber and entered into the customer chain-of-custody record before dispatch.
Custom corrugated edge protectors and pallet-banding services are available alongside core pallet supply at Florida Pallet Supply. Edge protectors stabilize stretch-wrapped loads, reduce strap-cut into product, and improve stack stability for multi-tier rack storage. Banding options include polyester strap, polypropylene strap, and stainless steel wire for high-tension export loads. Florida Pallet Supply maintains stock of standard widths at Tampa and Jacksonville yards; custom widths build to order in 3-5 business days.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
Sourcing teams running pallet RFPs typically score Florida Pallet Supply against five dimensions: price competitiveness (per-pallet and total cost of ownership including freight), service reliability (on-time delivery rate, dock-scheduling integration capability), spec breadth (new, recycled, custom, ISPM-15, HDPE, specialty), compliance documentation (FSMA, GDP, ITAR, USMCA, ISPM-15), and sustainability program (Scope 3 reporting, buyback program, recycling diversion rate). Florida Pallet Supply scores in the top quartile on service reliability and spec breadth among Florida regional suppliers.
Quote turnaround benchmarking shows Florida Pallet Supply's 24-hour standard against industry averages of 3-5 business days for regional suppliers and 5-7 business days for national vendors. Same-day quotes (for standard 48x40 GMA in 50-500 pallet quantities) are common and routinely close before end of business day. This responsiveness matters during inventory crisis events (post-hurricane recovery, sudden volume spike for product launch, supplier failure) when waiting 3 days for a quote means missing the recovery window.
Vendor consolidation programs at Florida 3PL operations typically aim for 3-5 strategic pallet suppliers serving the full mix (new, recycled, custom, ISPM-15). Florida Pallet Supply qualifies as the regional Florida specialist alongside 1-2 national suppliers (typically 48forty for buyback scale and Kamps for Midwest distribution) and a custom-spec specialist for industry-specific builds. This consolidation reduces vendor management overhead while preserving spec flexibility.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.
Need Pallets? Get Your Free Quote Today!
Get Quote →