Florida Pallet Supply delivers high-quality new and recycled pallets directly to businesses in Punta Gorda and throughout Charlotte County. From Manufacturing, Warehousing, Food Service to warehousing - we have the right pallets at competitive prices.
Same-day delivery available in Punta Gorda!
GET A PRICE →
Dry VanLive Load
Drop TrailerFlatbedWe deliver quality pallets on time, every time. Same-day or scheduled delivery, flexible delivery, and dedicated service. Large inventory means no supply shortages.
Save up to 40% on pallets in Punta Gorda!
Get Quote →Same-day and next-day available. Scheduled weekly deliveries for recurring orders.
Flexible - partial loads to full truckloads.
Yes! Buyback and retrieval programs available.
Fast response • Same-day or scheduled delivery • Punta Gorda, FL delivery
From manufacturing floors to distribution docks, Punta Gorda businesses trust Florida Pallet Supply for reliable pallet programs.
Punta Gorda Airport (PGD) is a rapidly growing commercial airport with increasing cargo activity. Freight forwarders and logistics operators use GMA pallets for air cargo compatibility with airline pallet handling systems.
Punta Gorda's extensive waterfront and harbor support a large boating community. Marine parts, boat accessories, and safety equipment distributors use new pallets to protect saltwater-sensitive inventory during coastal delivery.
Punta Gorda is a top retirement destination. Active adult and 55+ communities receive furniture, appliance, and building supply deliveries. Recycled pallets hold down cost on high-frequency residential supply chain deliveries.
We deliver pallets to cities throughout Charlotte County and across all of Florida.
Florida Pallet Supply is a member of the national pallet industry and follows ISPM-15 heat treatment standards for all export pallets.
Same-week pallet delivery across Charlotte counties with expanded coverage to all of Florida. Our network of vetted regional yards keeps Punta Gorda customers stocked even when single-yard suppliers run out of capacity.
Every spec, every grade, every volume - sourced from local yards and shipped same-week.
Grocery Manufacturers Association spec, Grade A stringer, 2,500lb dynamic capacity. Ideal for retail compliance, food production, and racking systems. Available kiln-dried for food-grade.
Inspected, repaired, and graded A or B. 30-50% less than new with full structural integrity for outbound shipping. Volume discounts on weekly recurring orders.
Kiln-treated to 56C core temperature for 30 minutes per IPPC standards. Stamped with treatment ID, certified for international export, documentation emailed to your QA contact before pickup.
Non-standard dimensions for retail programs, automotive parts, oversized goods. 36x36, 40x40, 42x42, 48x42, and any spec your buyer requires. Routed to our custom specialists.
We deliver to every major industrial zone and warehouse corridor across Charlotte County and surrounding metro Punta Gorda.
Verified reviews from local food distributors, manufacturers, and 3PLs.
"We switched our Punta Gorda DC over to Florida Pallet Supply last quarter and haven't had a single delivery miss. Their food-grade pallets meet our FSMA documentation requirements every time, and their AP contact gets the invoice without it crossing our ops team."
"When our previous yard had a fire in 2025 and couldn't deliver, FPS rerouted our Punta Gorda order to a backup supplier the same week. Same spec, same price. That kind of network redundancy is why we're not going back."
"Custom 36x42 pallets for a tricky retail program in Punta Gorda - our previous vendor said it would take 3 weeks. Florida Pallet Supply had them on our dock in 6 days at a better per-pallet price. Worth the call."
Heat-treatment chamber maintained at 56C core for 30 minutes per ISPM-15 Annex 1; each load shipped with a treatment certificate signed by a USDA-registered inspector.
Florida Department of Agriculture inspects pallet treatment facilities under the federal cooperative inspection agreement; our Tampa and Jacksonville locations are stamp-authorized facilities.
Florida Department of Transportation hauler permits restrict pallet loads above 80,000 lb GVW to specific corridors; our DOT-permitted carriers handle the routing.
Custom 42x42 pallet builds use 7/8 inch deck boards for telecommunications-equipment loads; nail-pattern density doubled to handle 5,000 lb static load; runner spacing optimized for 4,000 lb-capacity narrow-aisle reach trucks.
Block pallets (four-way entry) use nine 4-inch hardwood blocks with continuous-face top deck; ideal for ASRS (automated storage and retrieval) and AGV (automated guided vehicle) operations where stringer interruptions cause read-failures.
Dry-van loads handle weather-sensitive pallet stock and food-grade freight; sealed loads with bill-of-lading documentation; supports DOT-required commercial routing.
Manufacturing customers running JIT (just-in-time) lines require pallets delivered to specific dock doors on 2-hour windows; we offer GPS-tracked delivery with 15-minute arrival ETAs.
Custom pallet pricing depends on lumber spec, build complexity, and quantity: small runs (50-200 units) typically $35-55 per unit; large runs (500+ units) drop to $22-32 per unit; quotes returned in <2 hours.
Pallet pooling reduces lifecycle waste 40-60% vs single-use models; our pool program manages inventory between participating customers with quarterly reconciliation.
GMA pallet construction at Florida Pallet Supply follows the National Wooden Pallet & Container Association (NWPCA) Uniform Standard with measurable tolerances at every stage. Deck-board thickness measures 5/8 inch nominal; stringers are full 1.375 inch thick and 3.5 inches tall. Standard board configuration is 7 deck boards on top, 5 on bottom, with center boards spaced to support standard 13-inch corrugated case footprints. Nail count averages 50-75 helically-threaded 2.5-inch screw-shank galvanized fasteners per pallet, driven by automated nailing equipment that delivers consistent strike depth. Edge chamfering reduces forklift-strike damage by an estimated 40 percent over a 12-month service life compared to square-edge competitor builds.
Fork-pocket dimensions and fork-clearance specifications matter for warehouse equipment compatibility. Standard 48x40 GMA pallets provide 3.5-inch fork-pocket height (the gap between top deck and bottom deck created by stringers). This accepts standard 2-inch fork tine height with 1.5 inches of vertical clearance. Heavy-duty pallets with thicker stringers may reduce fork-pocket to 3.25 inches, requiring tine-height verification against your forklift fleet. Florida Pallet Supply confirms fork-pocket dimensions on every custom build to prevent dock-floor mismatch issues.
Custom corrugated edge protectors and pallet-banding services are available alongside core pallet supply at Florida Pallet Supply. Edge protectors stabilize stretch-wrapped loads, reduce strap-cut into product, and improve stack stability for multi-tier rack storage. Banding options include polyester strap, polypropylene strap, and stainless steel wire for high-tension export loads. Florida Pallet Supply maintains stock of standard widths at Tampa and Jacksonville yards; custom widths build to order in 3-5 business days.
Plastic HDPE pallets supplied by Florida Pallet Supply meet FDA 21 CFR 178.3520 for indirect food additive contact and tolerate wash-down cycles at 180 degrees Fahrenheit. Closed-cell injection-molded construction eliminates wood splinters, biological contamination harborage points, and moisture absorption. Standard 48x40 HDPE units weigh 28-32 lb empty (versus 38-42 lb for wood GMA) and carry 4,000-5,000 lb static load ratings. Lifespan typically reaches 8-12 years in closed-loop pool service, returning a per-cycle cost 60-75 percent below wood pallet replacement economics for high-rotation pharmaceutical, dairy, and frozen-protein operations.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
Procurement managers evaluating Florida Pallet Supply for new vendor onboarding typically request: (1) APHIS facility registration certificate for ISPM-15 compliance, (2) ISO 9001 alignment documentation, (3) FDA 21 CFR 178.3520 third-party lab test reports for food-grade stock, (4) sample lumber lot for incoming inspection, (5) reference customers in similar industry vertical, (6) financial stability indicators (D&B report, bonding capacity), (7) hurricane/disaster continuity plan documentation, (8) insurance certificate including general liability and product liability minimums.
Sourcing teams running pallet RFPs typically score Florida Pallet Supply against five dimensions: price competitiveness (per-pallet and total cost of ownership including freight), service reliability (on-time delivery rate, dock-scheduling integration capability), spec breadth (new, recycled, custom, ISPM-15, HDPE, specialty), compliance documentation (FSMA, GDP, ITAR, USMCA, ISPM-15), and sustainability program (Scope 3 reporting, buyback program, recycling diversion rate). Florida Pallet Supply scores in the top quartile on service reliability and spec breadth among Florida regional suppliers.
Quote turnaround benchmarking shows Florida Pallet Supply's 24-hour standard against industry averages of 3-5 business days for regional suppliers and 5-7 business days for national vendors. Same-day quotes (for standard 48x40 GMA in 50-500 pallet quantities) are common and routinely close before end of business day. This responsiveness matters during inventory crisis events (post-hurricane recovery, sudden volume spike for product launch, supplier failure) when waiting 3 days for a quote means missing the recovery window.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.
Need Pallets? Get Your Free Quote Today!
Get Quote →