Florida Pallet Supply delivers high-quality new and recycled pallets directly to businesses in Altha and throughout Calhoun County. From Manufacturing, Warehousing, Food Service to warehousing - we have the right pallets at competitive prices.
Same-day delivery available in Altha!
GET A PRICE →
Dry VanLive Load
Drop TrailerFlatbedWe deliver quality pallets on time, every time. Same-day or scheduled delivery, flexible delivery, and dedicated service. Large inventory means no supply shortages.
Save up to 40% on pallets in Altha!
Get Quote →Same-day and next-day available. Scheduled weekly deliveries for recurring orders.
Flexible - partial loads to full truckloads.
Yes! Buyback and retrieval programs available.
Fast response • Same-day or scheduled delivery • Altha, FL delivery
From manufacturing floors to distribution docks, Altha businesses trust Florida Pallet Supply for reliable pallet programs.
Altha sits in the heart of Calhoun County's timber belt. Logging operations and wood processing facilities depend on durable pallets for log handling, lumber stacking, and outbound product shipping.
Working cattle ranches near Altha rely on bulk agricultural input deliveries. Feed and veterinary supply distributors use recycled pallets for cost-effective delivery to rural receiving areas.
Calhoun County's peanut and corn farms need consistent pallet delivery of fertilizer and farm inputs. GMA pallets work with standard agricultural co-op and supplier dock systems.
We deliver pallets to cities throughout Calhoun County and across all of Florida.
Florida Pallet Supply is a member of the national pallet industry and follows ISPM-15 heat treatment standards for all export pallets.
Heat-treatment chamber maintained at 56C core for 30 minutes per ISPM-15 Annex 1; each load shipped with a treatment certificate signed by a USDA-registered inspector.
Plant City packing operations subject to USDA Marketing Order 905 require pallet markings traceable to the originating farm; we apply per-load barcode tags integrated with the Florida Tomato Committee compliance system.
Florida Sales Tax Exemption Form DR-46NT applies to pallets purchased for resale or for use in manufacturing of tangible personal property; we provide the form with every commercial invoice.
Block pallets (four-way entry) use nine 4-inch hardwood blocks with continuous-face top deck; ideal for ASRS (automated storage and retrieval) and AGV (automated guided vehicle) operations where stringer interruptions cause read-failures.
Recycled-Grade B pallets meet structural spec but may have up to 2 replaced deck boards; suitable for industrial loads outside food/pharma; price point 30-40% below new GMA.
Buyback programs pay current market rate for returned pallets in Grade A condition; minimum 50 pallets per pickup; integrated with our recycling stream for sustainability reporting.
Furniture manufacturers in High Point NC (and southeast suppliers shipping to FL) use custom oversized pallets for assembled freight; 60x40 and 72x48 builds available on 5-day production lead time.
Buyback pricing for returned pallets: $3-5 per Grade A unit; $1-2 per Grade B; minimum 50-pallet pickup; integrated with our recycling stream for sustainability accounting.
Lumber sourcing prioritizes regional Southeast US hardwood mills (FL, AL, GA, MS); reduces transport carbon vs Pacific Northwest stock; supports regional logging economies.
Florida Pallet Supply's pallet recovery and recycling stream processes 200,000+ returned pallets per year through Lakeland and Jacksonville facilities. Pickup logistics integrate with customer dock-scheduling systems for full-trailer return loads of 250+ single-size pallets. Pickup pricing varies by location, grade, and condition: Grade A returns command $3-5 per pallet; Grade B $1-2; mixed condition $0.25-1; broken cores enter the chip-and-mulch stream at $0.10-0.25 (mulch sold separately to landscaping operators). Diversion rate from landfill runs 80 percent.
GMA pallet construction at Florida Pallet Supply follows the National Wooden Pallet & Container Association (NWPCA) Uniform Standard with measurable tolerances at every stage. Deck-board thickness measures 5/8 inch nominal; stringers are full 1.375 inch thick and 3.5 inches tall. Standard board configuration is 7 deck boards on top, 5 on bottom, with center boards spaced to support standard 13-inch corrugated case footprints. Nail count averages 50-75 helically-threaded 2.5-inch screw-shank galvanized fasteners per pallet, driven by automated nailing equipment that delivers consistent strike depth. Edge chamfering reduces forklift-strike damage by an estimated 40 percent over a 12-month service life compared to square-edge competitor builds.
Block pallet construction at Florida Pallet Supply uses nine 4-inch hardwood blocks arranged in a 3-by-3 grid with continuous-face top and bottom decks. Each block is precision-cut from kiln-dried hardwood and nailed with eight 3-inch screw-shank fasteners per block. The continuous-face deck is critical for ASRS (Automated Storage and Retrieval Systems) and AGV (Automated Guided Vehicle) compatibility because stringer interruptions in conventional pallets cause sensor read failures that halt automation lines. Block construction also supports true four-way pallet jack entry from all four sides, eliminating the partial-entry limitation of notched stringer pallets.
Pallet weight distribution and load engineering at Florida Pallet Supply follows ASME MH1 2016 standards for dynamic, static, and racked load ratings. Dynamic load (during forklift transport) is set at 60 percent of static load to account for shock and vibration. Racked load (front and back stringer support only, mid-deck unsupported) is set at 60 percent of static load to account for deck deflection. Standard 48x40 GMA: 2,500 lb dynamic, 4,600 lb static, 2,800 lb racked. Heavy-duty 48x40 builds with reinforced deck and double-runner stringers: 4,000 lb dynamic, 7,500 lb static, 5,000 lb racked.
Net 30 standard for established customers with credit approval. First three orders run Net 15 or COD. ACH transfer is preferred for invoice payment; credit card accepted with 2.5 percent processing surcharge above $10,000 per transaction. Wire transfer accepted for large orders and international customers. Letter of credit available for export orders over $50,000 on request.
CP (Chemical Pallet) series are specialized European specs designed for chemical industry export. CP1 measures 1200x1000mm, CP2 1200x800mm, CP3 1140x1140mm, CP9 1140x1140mm reinforced. All carry ISPM-15 heat treatment. EUR/EPAL pallets measure 1200x800mm, use an 11-board pattern, weigh ~25 kg, and are the dominant general-purpose European spec. Florida Pallet Supply builds both CP and EUR/EPAL for European exporters; lead time 7-10 business days, EPAL certification optional.
Yes. Knockdown (KD) pallets ship flat to save freight space and assemble on-site. Common for international shipments where dimensional weight constraints favor flat-pack. Florida Pallet Supply builds KD pallets in 48x40 GMA and custom sizes; assembly hardware (nails, brackets) included. Per-pallet pricing runs 10-15 percent higher than pre-assembled but freight savings often offset for trans-oceanic shipments.
Yes - when properly inspected and graded. Recycled Grade A pallets must demonstrate no broken or replaced boards, fully legible GMA stamp, and pass dynamic load test before grading. Load capacity meets the 2,500 lb dynamic / 4,600 lb static specification per ASME MH1 2016. Recycled Grade B pallets retain structural integrity but show repaired boards; load capacity is typically reduced to 2,000 lb dynamic for non-critical industrial loads.
Wood GMA pallets typically last 8-15 trips in a typical distribution cycle (warehouse to retail and back). Heavy-duty builds with reinforced stringers and 7/8-inch deck boards stretch lifespan to 20+ trips. Block pallets last longer than stringer pallets - typically 25-40 trips - because the continuous-face deck distributes load forces across nine support blocks instead of three stringers.
Yes. Florida Pallet Supply ships mixed orders routinely. Common scenarios: new pallets for high-visibility customer-facing shipments (DTC e-commerce, retail-ready displays) and recycled Grade A for industrial inbound. Pricing applies per pallet type; freight bundles all types on a single truckload. Standing-order programs can lock pricing on a multi-type basket.
Yes. Florida Pallet Supply offers API integration with major WMS systems including Manhattan Active, Oracle WMS Cloud, SAP EWM, Blue Yonder, HighJump, and Mecalux Easy. Custom integration with proprietary ERP systems supported via REST API or EDI. Per-pallet barcode data, lot traceability records, treatment certificates, and POD documentation flow automatically to the customer system.
The IPPC stamp is branded into the wood (not painted or stickered) on at least two opposite sides of each pallet, after heat treatment completes. The stamp shows the IPPC wheat-stalk logo, US country code, the facility's APHIS-registered number (assigned by USDA), and the HT treatment code. Hand-drawn, painted, or stickered marks are rejected at customs because they can be falsified. Stamp legibility must survive normal pallet handling for the full export trip.
Same-day delivery in 19 Florida same-day counties carries no premium over standard pricing for orders confirmed by 2 PM EST. Next-day statewide delivery also has no premium. Emergency dispatch (24/7 outside business hours) carries a $250-500 freight surcharge depending on origin yard and destination distance. Weekend dispatch with 24-hour notice runs $100-250 freight premium for premium-account customers.
Pool pallets are owned by the rental company (CHEP blue, PECO red) and circulate in a closed-loop. You pay per trip and return them. Owned pallets are yours - bought once, depreciated over service life. Pool models work for closed-loop CPG-to-major-retailer flows (Costco, Walmart, Kroger). Owned models work for variable distribution lanes, export, custom specs, and any operation outside the major-retailer pool network. Florida Pallet Supply supplies owned pallets and supports the buy-back program at end-of-life.
Both. Per-pallet pricing is standard for orders under 1,000 pallets per quote. Per-truckload pricing applies when orders fill a 53-foot dry van (~600 pallets for standard 48x40 GMA, ~300 for oversized custom). Truckload pricing typically saves 5-15 percent over per-pallet equivalent because freight bundles efficiently. Standing-order customers receive freight bundled into per-pallet pricing for predictable accounting.
Yes. Florida Pallet Supply welcomes customer tours of the Lakeland and Jacksonville processing yards. Tours typically take 90 minutes and include the receiving dock, inspection stations, heat-treatment kilns, build floor, dispatch staging, and quality records library. 30 days notice required for scheduling. Tours are common during initial vendor qualification and quarterly review for standing-order customers.
Procurement managers evaluating Florida Pallet Supply for new vendor onboarding typically request: (1) APHIS facility registration certificate for ISPM-15 compliance, (2) ISO 9001 alignment documentation, (3) FDA 21 CFR 178.3520 third-party lab test reports for food-grade stock, (4) sample lumber lot for incoming inspection, (5) reference customers in similar industry vertical, (6) financial stability indicators (D&B report, bonding capacity), (7) hurricane/disaster continuity plan documentation, (8) insurance certificate including general liability and product liability minimums.
Quote turnaround benchmarking shows Florida Pallet Supply's 24-hour standard against industry averages of 3-5 business days for regional suppliers and 5-7 business days for national vendors. Same-day quotes (for standard 48x40 GMA in 50-500 pallet quantities) are common and routinely close before end of business day. This responsiveness matters during inventory crisis events (post-hurricane recovery, sudden volume spike for product launch, supplier failure) when waiting 3 days for a quote means missing the recovery window.
Vendor consolidation programs at Florida 3PL operations typically aim for 3-5 strategic pallet suppliers serving the full mix (new, recycled, custom, ISPM-15). Florida Pallet Supply qualifies as the regional Florida specialist alongside 1-2 national suppliers (typically 48forty for buyback scale and Kamps for Midwest distribution) and a custom-spec specialist for industry-specific builds. This consolidation reduces vendor management overhead while preserving spec flexibility.
Florida Pallet Supply maintains compliance with standards from the National Wooden Pallet & Container Association (NWPCA - palletcentral.com), USDA Animal and Plant Health Inspection Service (APHIS - aphis.usda.gov), International Plant Protection Convention (IPPC ISPM-15 - ippc.int), FDA Food Safety Modernization Act Section 204 (fda.gov), Random Lengths lumber pricing index (randomlengths.com), American Society of Mechanical Engineers MH1 pallet load standard (asme.org), Florida Department of Agriculture (FDACS - fdacs.gov), Customs and Border Protection wood packaging requirements (cbp.gov), Florida Citrus Mutual (flcitrusmutual.com), Florida Tomato Committee (floridatomatoes.org), and the Florida Customs House Brokers Association (flchba.com). Compliance documentation is provided with every export load at no additional charge and supports customer audits, internal QC review, and regulatory submission as required.
Need Pallets? Get Your Free Quote Today!
Get Quote →